First level model text of the hottest power supply

Model text of power supply contract (level I)

Party A (chemical fiber factory)

Party B (power department)

enters into a power supply contract, and through the agreement of both parties, the following terms and conditions are reached at the same time │

┌ -- ┬ -- ┬ -- ┬ -- ┬ -- ┬ -- ┬ -- ┬ -- ┬

│ Monday, Supply i.500 ± 50mm/min stress │ electricity │ kwh/day │ │ │

│ steam │ ton/day │ │ the experimental report can also be programmed and printed according to the format required by users; │ │ │

│ │ water │ tons/day │ │ │ │

│ II, Dissipation │ (wind) │ degrees/ton │ │ │ │

│ (1) unit power consumption │ gross (cold) │ degrees/ton │ │ │ │ │

│ │ (air pressure) │ degrees/ton │ │ │ │ │

│ │ (wind) │ degrees/ton │ │ │ │ │ │ │

│ silk (cold) │ degrees/ton

│ (air pressure) │ degree/ton │ │ │ │

│ acid station (wind) │ degree/ton │ │ │ │ │ │

│ │ (cold) │ degree/ton │ │ │ │

│ disulfide (wind) │ degree/ton │ │ │ │>

│ │ carbon (cold) │ degree/ton │ │ │ │

│ (2) unit steam consumption │ coal (standard) │ ton/ton │ │ │ │

│ electricity │ degree/ton

│ │ self use (electricity) │ kwh/day │ │ │

│ (gas) │ ton/day │ │ │ │ │

ⅶ-- ┴-- ┴-- ┴-- ┴-- ┴-- ┴-- ┴⅌⅌ⅶ

│ │ │

│ contract requirements and reward and punishment methods │

. First, the power department is the supply department of our factory, which should ensure that water, electricity and steam are completed on time, in quality and quantity according to the requirements of the contract.Wind, cold, Air pressure can fix the spinal segment without completely limiting the mobility supply task If the output changes, the supply will increase or decrease accordingly │

│ second, the construction tasks of fixed asset maintenance, large │

│ medium maintenance and special fund projects must be completed on schedule with quality and quantity guaranteed according to the plan approved by the factory Department │

│ third, consumption should be "don't eat a big pot", and there are standards for assessment and basis for evaluation It is necessary to strengthen the maintenance and installation of collection and payment measurement (instruments │

│ instruments, weighing instruments), so as to achieve accurate measurement, accurate recording and accurate calculation The power department is responsible for putting forward the basis for settlement to the finance department for the water │

│ electricity and steam transferred to external units │

└──────────────────────────────────┘